Today, CNC lathe manufacturers will talk about how to avoid CNC machine tool failures as much as possible.

1. For machine tools that have been in use for a long time, it is advisable not to shut them down during long holidays, and emergency stops can be recorded.

2. Regularly check the system fan. If it is contaminated with excessive oil, it should be replaced or cleaned. If it has been used for more than 3 years, it must be replaced.

3. Regularly check the hydraulic oil pressure, liquid level, and hydraulic impurities in the hydraulic system to ensure smooth oil flow.

4. Regularly clean or lubricate spring-loaded components such as process switches, blade arm springs, hydraulic valve springs, etc.

5. Regularly clean the drive equipment according to its contamination with oil.

6. Regularly replace the system battery and desiccant for the machine tool electrical cabinet, especially before shutting down during long holidays, this step should not be forgotten.

7. After the long holiday, before restarting the machine, it is necessary to manually preheat each circuit board of the machine tool. A hair dryer can be used to heat each circuit board for a few minutes, with a slight temperature.

I hope today's content is helpful to everyone. If you want to know more, please follow CNC lathe manufacturers to learn more